BL SOL LED modules / Produced by BILTON / Indoor
3000lmLuminous flux per meter
FSColour rendering index CRI
- New LED strip for light close to sunlight due to very high CRI
- For exceptional applications where natural light is needed.
BILTON SOL 3000 LED strip 24VDC 29W/m IP20 FS 4000K WHITE 5m
LED module BL SOL
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LED dimmer.
Suitable for ambient temperatures from at a service life of .
The BL SOL LED-strip has a luminous flux of 3000 lm at 29.0 W, resulting in an efficiency of . At a nominal voltage of 24 V DC on the connection, a maximum module length of 4000.0 mm can be achieved. In terms of lighting, the module has a colour temperature of 4000 K and a beam angle of 120°. All this with a colour rendering index of FS and a Binning selection based on (MacAdams). The light strip can be separated every 50.0 mm, resulting in a LED distance of . Degree of protection IP20
Dimension (L x W x H): 5000.0 mm x 8.0 mm x 1.5 mm
|Net width||8.0 mm|
|Net height||1.5 mm|
|Net length||5000.0 mm|
|Degree of protection (IP)||IP20|
|Net weight||49 g|
|Length of particular segments||50.0 mm|
|Lamp power per meter||29.0 W|
|Lamp voltage||24 V|
|Light technical data|
|Luminous flux per meter||3000 lm|
|Colour rendering index CRI||FS|
|Colour temperature||4000 K|
|Energy efficiency class provided exchangeable built-in lamp||G|
|Max. length||4000.0 mm|
|Customs tariff number||94054099|
|Gross weight||175.0 g|
|Gross height||18.0 mm|
|Gross width||200.0 mm|
|Gross length||200.0 mm|
|State of origin||AT|
* Specifications of the electrical and photometric parameters: All values are valid in the thermally steady state at 25 ° C ambient temperature under the standardized measuring environment of BILTON. Nominal lumen values differ for different light colors, these values can be found in the respective data sheets. All values can have tolerances of +/- 15 %.