BLONE 1300 >90 LED modules / Produced by BILTON / Outdoor
BLO191300024DC128X6927000W20 available
Top Features
-
24VLamp voltage
-
1190lmLuminous flux per meter
-
8000.0mmMax. length
-
>90Colour rendering index CRI
- Best light quality for shop lighting with CRI >90
- Improvement of homogeneity by 20 additional LEDs per meter
- Wide choice of light colors and lumen packages
- With a maximum module length of up to 8000.0 mm long, linear lighting lines can be implemented
- UL certification available
BILTONONE 1300 LED strip 24VDC 12,8W/m IPX6 CRI>90 2700K WHITE 20m
LED module BLONE 1300 >90
Article 101552
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LED dimmer.
Suitable for ambient temperatures from -20 ... +45 °C at a service life of 60000 h .
The BLONE 1300 >90 LED-strip has a luminous flux of 1190 lm at 12.8 W, resulting in an efficiency of 93 lm/W. At a nominal voltage of 24 V DC on the connection, a maximum module length of 8000.0 mm can be achieved. In terms of lighting, the module has a colour temperature of 2700 K and a beam angle of 120°. All this with a colour rendering index of >90 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 50.0 mm, resulting in a LED distance of 7.14 mm. Degree of protection IPX6
Dimension (L x W x H): 20000.0 mm x 8.0 mm x 1.5 mm
| Mechanical data | |
|---|---|
| Net width | 8.0 mm |
| Net height | 1.5 mm |
| Net length | 20000.0 mm |
| Degree of protection (IP) | IPX6 |
| Colour | White |
| Net weight | 204.8 g |
| Distance | 7.14 mm |
| Distance relating to | LED to LED |
| Length of particular segments | 50.0 mm |
| Electrical data | |
|---|---|
| Overall efficiency | 93 lm / W |
| Lamp power per meter | 12.8 W |
| Lamp voltage | 24 V |
| Imput voltage range | 23 - 25 V |
| Voltage type | DC |
| Protection class | III |
| Light technical data | |
|---|---|
| Luminous flux per meter | 1190 lm |
| Beam angle | 120° |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Colour rendering index CRI | >90 |
| Colour temperature | 2700 K |
| Energy efficiency class provided exchangeable built-in lamp | F |
| Connection | |
|---|---|
| Number of poles | 2 |
| Conductor cross section | 0.50 mm² |
| Max. length | 8000.0 mm |
| Temperature technical data | |
|---|---|
| Rated life time L80/B10 at 25 °C | 60000 h |
| Ambient temperature during operating | - 20 ... + 45 °C |
| Ambient/storage temperature | - 5 ... + 55 °C |
| Operation temperature at Tc | - 5 ... + 60 °C |
| Packaging information | |
|---|---|
| EAN | 4250716934908 |
| Article no. | 101552 |
| Customs tariff number | 94054099 |
| Length | 20000.0 mm |
| Gross weight | 328.6 g |
| Gross height | 18.0 mm |
| Gross width | 200.0 mm |
| Gross length | 200.0 mm |
| State of origin | AT |
* Specifications of the electrical and photometric parameters: All values are valid in the thermally steady state at 25 ° C ambient temperature under the standardized measuring environment of BILTON. Nominal lumen values differ for different light colors, these values can be found in the respective data sheets. All values can have tolerances of +/- 15 %.